Ever since the pandemic struck, internet usage has skyrocketed around the world. It would be an understatement to say that routers are a staple appliance in every household and office. So, you might go ahead and purchase a router, for instance, a Genexis router, and perform a Genexis login.

genexis router

Most of our work today relies on the internet, and due to its overwhelming demand, we find ways to get better and abundant data connectivity. So, it wouldn’t hurt you to buy a new router with the latest functionalities! Genexis router is one such router. 

This guide will take you through three different ways to do a Genexis router login. You don’t have to worry about the complexity of the steps, as they are all easily explained. You can try all of them individually if you want, but we suggest starting with the first one as it is the easiest.

See Also: How To Reset Linksys Router | The Complete Guidelines

How To Perform a Genexis WiFi Router Login:

Every family is getting a router these days, and they get worried about setting it up. One might also think of contacting a technician to set it up, but it is unnecessary. Not just a family but every commercial or corporate institution cannot operate without routers. 

platinum genexis router

If you have a router at your home, you might want to log onto your router’s IP to relish some additional benefits rather than just using an internet connection. There are three methods to do that. Run each way in order until you are finally able to log in. All three of them are given below:

Using Most Frequent User Credentials:

This method is pretty easy. In this method, you must type the most often used sets of credentials. Below are the instructions you need to follow to get into your IP’s user interface.

  1. First, check if your router is correctly connected to your PC to perform a Genexis router configuration. You can connect to your PC via LAN or wired Ethernet connection, preferably the latter way.
  2. Once you have verified that the indicator is on/flashing, open a web browser on your PC. It can be any web browser based on your preferences like Chrome, Firefox, or Edge. Then, type the IP for the Genexis login in the address bar. The IP can be any one of the following default IPs. Try them both to setup Genexis modem: and page
  3. After completing all the steps detailed above, you will view a login page on your web browser. The prompt on the screen requests the user to provide a user ID and password. If you are not aware of the default credential combinations, use the following combinations.

1). Username- admin, Password- 1234

2). Username- admin, Password- admin

3). Username- admin, Password- password

See Also: How To Find Network Security Key On Windows, Mac And Android

Using Credentials Printed On the Genexis Router:

If the combinations given above do not help you, do not worry! There is another way to complete a login. Read the steps listed beneath to set up your GNX modem:

  1. In this method, you need to find a label on the bottom of the router box. The factory usually prints your router’s IP address credentials and other details on this label.genexis credentials
  2. The manufacturer also prints it on the router. 
  3. Use this combination for the Genexis Login.

Once you finish these steps, go back to the first method and continue with the steps. The second method was a simple alternative to finding the proper credentials. However, if this still doesn’t work, you have a third method waiting for you:

Reset The Router

If you have reached method 3, you probably had already fixed a passcode, but you forgot them over time. And the best resolution for that is just to reset your router. This is the last method, and it is pretty easy too:

  1. Start by locating a little hole at the router’s backside. genexis router reset
  2. Then find a thin and sturdy object like a toothpick. 
  3. But remember that it is not very sharp or pointed. 
  4. Then, jab this tool into the reset button and press it for around twenty to thirty seconds without taking off your hand. press the reset button with toothpick
  5. On doing this correctly, the router will turn off shortly and then switch back on, signifying that it has been reset successfully. See, that was easy!

But this was just one stage of your Genexis login. Now, just go to the first method and try logging in using the most common combinations. This was, as already told above, the last method. Now, let’s move on to the troubleshooting section to diagnose and treat your router’s issues.

See Also: How To Perform IBall Router Login – A Complete Guide

Troubleshooting Errors During Genexis Login:

You may have seen that the router produces some unforeseen issues. The causes of these problems might be ridiculous, like a loose connection or wrong credentials. But once you identify them, you will be able to fix them.

Anyways, you don’t need to call a technician or ask some of your friend’s help to correct it. Just ensure to follow the straightforward and effortless solutions given below to troubleshoot any errors:

  1. Ensure that the router and PC are correctly connected. Even the most minor disturbances in the wires may generate a problem.pc router connection diagram ethernet
  2. Also, make sure that the cables joining your devices are in working condition.
  3. Try rebooting the router. Switch it off for some duration and then switch it back on.
  4. Disable the firewall settings on your PC to get an uninterrupted internet connection. how to enable or disable firewall in windows
  5. You might make the most typical mistake- typing the wrong IP address onto the location bar. While you are at it, cross-check if you have typed the periods correctly and there are no special characters. See to it that there are only digits while typing, as in some cases, one might mistake ‘O’ for 0.

If you still can’t solve the issues, you should try contacting a technician who will provide the help you to mend the problems.


How do I log in to my Genexis router?

Go to the Official website of Genexis and enter the default username and password; tap login.

What is the IP address of Genesis?

The official website and IP address of Genexis is

What is the default username of Genexis?

The default password for Genexis is 'admin.'

What should I do if my Genexis is not working?

You have to ensure that there are no loose connections and that all the links are correct. Also, ensure that the internet connection is good, and If nothing works, you can try resetting the device.


As you read, the procedure for Genexis login is pretty straightforward, simple, and quick. You just need to try the three methods given above. If you face any issues, go through the troubleshooting section. And, that’s it, you are done with the Genexis router setup. Happy web surfing!

See Also: Huawei Router IP Panel Guide | Perform Huawei Router Login Easily

Leave a Reply