TP-link is a universal provider of networking appliances essential in our daily life. TP-link re 360 acts as a Wi-Fi extender and helps ease our work. Several users vouch for its quality and performance. This article acts as a perfect guide for TP-Link re360 login.
However, many users face login problems. If you are one of them, you have visited the correct page.
See also: How To Perform Cradlepoint Login? [Complete Guide]
Table of Contents
Guide For Tp-Link Re360 Login
Here are the steps to follow that provide you with a login guide for TP-Link RE360.
- To login to TP-LINK RE360 Router, Open your web browser and type the default IP Address 192.168.0.254 in the address bar.
- You should now see the router login page with two text fields where you can type a username and a password.
- The default username for your TP-LINK RE360 router is admin, and the default password is admin.
- On the login page of the router’s web user interface, type in the username & password hit “Login,” and now you should see the TP-LINK RE360 router control panel.
Visit: TP-Link
When Credentials Do Not Work
Some of the most popular username/password combinations for TP-Link routers are included in the list below. Aim to combine the following if you are having trouble with re360 logins or if you forget your password.
| Username | Password |
| adm | adm. |
| admin | |
| (blank) | admin |
| admin | Ttnet |
| admin | 2011 |
| create in setup | create in setup |
| n/a | admin |
| n/a | |
| (n/a) | Super |
| (blank) | User created |
| (blank) | (blank) |
See also: How To Log On To Portmaster | A Complete Guide
The Most Common IPs Used By Tp-Link Routers
You’ve tried several different IP addresses, but nothing has changed. Then you should attempt the IP addresses on the list below for successful re360 login. Default Router IP:-
- 192.168.1.1
- 192.168.0.1
- 192.168.0.254
- 192.168.1.254
- 192.168.1.253
- http://tplinkplc.net
- tplogin.cn
- http://tplinkap.net
- 192.168.100.1
- http://tplogin.cn
- http://tplinkmodem.net/
- 192.168.10.1
- dd
- 192.168.0.100
- 172.10.10.1
A factory reset of your RE360 tp-link router is an option if nothing else worked and you truly need access to it. The router will turn on and reset its settings for a few minutes. Most of the time, you can force a factory reset by holding down a little button on the router’s rear for 10 to 20 seconds. After a factory reset, all connected devices are disconnected from the router, and some devices need to be rejoined in the router. If you’re unsure, ask a professional for assistance in resetting the router if necessary.
See also: 192.168.0.101 IP Login Guide, Username & Password
How To Factory Reset Tp-Link Re360 V1 Router
You should be able to RE360 login device using the following settings if you haven’t reset it or alter the defaults.
Default Network name (SSID): TP-LINK_Extender_2.4GHz, TP-LINK_Extender_5GHz
Default subnet mask: 255.255.255.0
See Also: 172.16.16.1 IP Address
How To Factory Reset (Hard Reset) Tp-Link Re360 V1
The following procedure will allow you to factory reset your TP-LINK RE360 v1 (s) utilizing a web interface.
- Access the router’s web interface by launching a browser (see default settings below)
- Look under System Tools in the menu for the Factory defaults option.
- To reset, click the Restore button on the Factory defaults page.
- Use the WPS/RESET button and Have the device turned on.
- Press and hold the reset (occasionally reset/WPS) button for 10 seconds with a paperclip or other sharp item.
- Release the reset button as soon as the SYS led blinks, then wait for the router to restart.
How To Boost Tp-Link Re360 Wifi
Several methods of solving this issue are:
Put The Tp-Link Re360 At The Ideal Location
Keep your TP-LINK RE360 router visible and away from the wall or the drapes to receive the best signal and network connectivity.
Choose A Good Wireless Channel On Your Tp-Link Re360 Router
Auto channels may occasionally fail you, but remember that you are a more intelligent being than the TP-LINK router! Find a smooth Wi-Fi channel as opposed to using what the router suggests. This would guarantee that your signal doesn’t obstruct your neighbors’ signals.
On a Windows computer, you may view the channels nearby Wi-Fi networks are using.
- Press Start > type “cmd.” Open Command prompt
- In the command prompt, type netsh wlan show all check the frequency of TP-LINK RE360
The most widely utilized band on the TP-LINK RE360 is 2.4GHz, but upgrading to 5GHz will yield better results. Check to see whether it has a dual-band. However, it depends on your device; if you’re using an outdated model, you might need to go back to the traditional.
Hardwire Gaming Consoles/Media Streamers In Tp-Link Re360
Since you might not be moving your TV around the house, there is no reason to connect it to the Wi-Fi since gaming consoles and media streamers function better when connected through An Ethernet cable from TP-LINK RE360. Video streaming and gaming consoles overburden the network with data. This implies that you should if at all practical, think about hardwiring (using Ethernet cable) the devices that have a propensity to use a lot of bandwidth. If you can hardwire the bandwidth hogs, it can increase the speed of your TP-LINK RE360 network, which can somewhat defeat the purpose of having wireless networks.
See also: What Is A Good Internet Speed For Gaming And Other Internet Tips For Gaming
Restart The Tp-Link Re360 As Scheduled
Here’s something crucial to remember! Please restart your TP-LINK RE360 router as scheduled. Although routers are designed to operate continuously, they may resolve most problems with a few easy adjustments, such as frequent power cycling (a fancy way of saying removing the power cord and inserting it back in).
Rebooting your TP-LINK RE360 can cure wireless issues, speed up sluggish connections, and resolve Internet connection issues. To be proactive, try unplugging your TP-LINK modem every three months (Never reset; always reboot the router.)
FAQs
What is the default login id and password for the re360 login?
Admin and Admin is the most common login id and password for the routers. However, you can find the proper credentials under the router.
Credentials are not visible. What should I do?
You can visit your router's manual online if the credentials are not visible. You can get the correct credentials there. Otherwise, you can try some standard login ids and passwords mentioned in the article above.
What is the 30-30-30 for re360 login reset?
This method includes three steps. First, turn off the router and hold the reset button for thirty seconds. After that, while pressing the reset button, unplug the router from the power source. Hold it for thirty seconds and release the reset button.
Conclusion
There are several ways you can log in to your re360 router. You can obtain the proper credentials below the router. You can always visit the online manual and check for the same if they aren’t there. If this fails, you can try using standard login ids and passwords. There is a high chance this will succeed. If nothing works, you can reset the login id and password by many methods.
We believe we were able to address your re360 login query.
See also: Comfast Login I A Complete Guide
Originally hailing from Troy, Ohio, Ry Crist is a text-based adventure connoisseur, a lover of terrible movies and an enthusiastic yet mediocre cook. He has a strong appreciation for nifty, well-designed tech that saves time, looks stylish, and/or helps him avoid burning his dinner quite so often. Ry lives in Louisville, Kentucky.
