In today’s article, you will find a complete manual of the Binatone Router login and steps to set up your account. We will guide you through the process of opening the Binatone Router admin page. Along with this, you can check out this article, an easy guide for mi router login!
We will also provide you with a simpler version of the usual manual, that you get along with the router or on the internet. This article will cover all the steps required to log in with the router.
A router is a networking device that connects to two or more data lines from various IP networks. Routers connect a device with the internet service provider. It is thus crucial to learn how to configure the router to customize your home network. Read on to find the easiest way to set up your account with Binatone Routers. If you are a game lover, then follow this article for a complete guide on setting up ps4 IP address.
See Also: Netis Router Login | Complete Guide On Management And Security
Table of Contents
Binatone Router login
Generally, a router has two IP addresses:
- Internal IP Address
- External IP Address
Visit: Binatone Global
Finding The Internal IP Address of The Router
Turn the router and look at the backside. You will find the default username and password and the IP address. Sometimes, you may not find the credentials.
In that case, open CMD (Command Prompt) from the Start menu and select “ipconfig”.
Get Access to The Router
A router provides the credential details on the router itself. In situations where such default credentials are not provided, follow the steps below:
- In the “Start menu” enter “ipconfig”.
- You will then see the network status of your device, which is in use.
- Under that, you will find the header “Default gateway”.
- The IP address of the router is now visible on the header.
- Enter the IP address on the browser. It will then guide you to the required page.
You will have to enter your username and password on the interface. The default credentials provided to the user is:
- Username: admin
- Password: password
- Combining the credentials will give you access to the router.
- Login in with such details and set up the IP protocol.
- Enter 192.168.0.1 or 192.168.1.1 on the address bar of your web browser.
- Click enter and you will arrive at the login page. Enter your username and password to log in.
See Also: 192.168.0.101 IP Login Guide, Username & Password
Connect To The Internet
- Enter exact details to configure the router.
- Click on the “Interface Setup” tab. You can see the default credentials over the page.
- You can change the details by entering the username and password of your choice.
- Click on “Next”. Now you will get connected to the internet.
Change Details Over The Binatone Router Admin Page
Enter the Binatone router page. Enter the details to log in. This will let you get access to the Wi-Fi router. You can change the details available by entering credentials of your choice. Let us look at some functions which you can change. Also, learn to set up and install Quick Ubee WiFi from here.
Rename Wi-Fi
Visit the Binatone router admin page. Go to Network > WLAN > Security settings. Below the header SSID, you can enter the desired Wi-Fi name. Select the “enable SSID” option to activate the changes.
Change router password
Go to Network > WLAN > Security settings. The Wi-Fi password will be visible under the WPA key header. For improved security, we recommend you change the password every 6 months.
Tweak Wi-Fi security option
Select WPA2-PSK as the “Encrypt Type”. This option is the highest security recommendation available for a router.
Use PPPoE (Point-to-Point over Ethernet)
You may face some Wi-Fi issues while connecting to the internet. In such a case, you can prefer using internet connections using an Ethernet cable. To do so, visit Network > Broadband settings > Internet settings. Select PPPoE as the “Link Type”. Enter the username and password of your PPPoE connection. Click on “Apply”. You can now use the wired connection for the internet and connect the same to other devices. Click here, to learn the guide to using an ethernet switch.
Tips: Perform a factory reset if you cannot get access to the Binatone router login. Press a tiny button placed on the back of the router and hold on for 10-20 seconds. The router will light up and reset all existing settings. You will now get back to the default settings. The devices connected to the router will also get disconnected. You can start afresh and connect the devices to the router from the beginning. If even this technique does not work, then you have to check out with an expert to guide you through the process.
Effect Of Factory Reset On Router Settings
After performing a factory reset to the router, the saved password may get changed. You have to reset your password. The default password and username will be visible to the user. You will find these details on the backside of the router.
You can find the Network Setting Key below the “Networks and Sharing Centre” of Windows. Select “Wireless Network” and click on Wireless properties > Security. Open your web browser and you will find your Wi-Fi network.
FAQs
How to use the Binatone router?
Connect your router using an Internet port or Ethernet cable. Switch on the modem by plugging it into a power supply source. Set up your account by entering your username and a password.
How can I change my Binatone Router Wi-Fi password?
Open the browser and type 192 on the address bar. Enter the IP address and get access to the router's user interface. Use default username as 'Admin' and password as 'password'. This will help you arrive at the admin page, where you can change the credentials as per your choice.
Why should I reset the wi-fi router?
Sometimes, we choose a particular username and password. But the same is already in use on the internet. In such cases, you can perform a factory reset and repeat the login process. Enter a different username and password.
How can I perform a factory reset on the Binatone router?
On the back of the router, there is a small button to reset all settings. Provide username and password as per your choice. It might look like DSLVX1452 or 123789. Use a pin or a pointed object to press the button. Press the button and hold on for 20 seconds. After 20 seconds, the Wi-Fi router will restart and your reset process ends.
Where can I find the Wi-Fi router username and password?
Routers come along with a user manual. You can also get the user manual on the internet. Just type the model name on the search engine. Search 'manual' and you can read the user manual provided by the Binatone router.
Can we switch on or off the Binatone router?
You should switch off and reboot the Binatone router only when required. It will not damage the router but may lead to a failure in the power supply. The router has a physical on/ off button on the front panel. To reboot, press the button and hold on for 2-3 seconds.
Conclusion
You have now known the basic steps and techniques to get access to the Binatone router login. Remember the username and password you have entered while logging in. We have thus provided a simpler version of the user manuals you get with the device or over the internet. The steps we have mentioned in the article are easy to use.
The Binatone router login process will become an easy one for you. The steps mentioned in the article are easy and will help you set up an account. Follow the steps and get access to the Binatone router within fractions of a second. Refer to the steps mentioned above. Enter step by step and get your device or system connected to the internet.
See Also: Jio Router Login Guide | How To Login Into Jio Router
Been a journalist since 1987 and am lead writer for Router Login. I cover games, chips, hardware, R&D, and other tech. Wrote two books on Xbox.
