The Arris TG3452 modem supports 2×192 Mhz and 2×96 MHz OFDM downstream and upstream, respectively. It consists of 2 FXS ports of carrier-grade VoIP. A 4-port gigabit router and double band 802.11nac wireless access point. It provides high-speed data, IP videos, and voice to wired and wireless devices as it is highly optimized for delivering Gb data services.  

For delivering high-speed data, the first step involves accessing the router. For logging into the Arris TG3452, you need the device’s IP with its login username and password. The most used password credentials for the router login are “admin” and “password,” respectively. At the same time, the most common IP is 192.168.0.1. 

You won’t need any technician or techy friend to help you log into your router after going through this article. Your manual can help you a lot is this issue. But if you don’t have your manual, this article is for you. Let’s discuss the router login methods in detail. 

How to connect to Arris TG3452?

To reach the arris router’s login page, you must be connected to it. The router’s default network (SSID) name for wifi connection is ARRIS-XXXX, ARRIS-XXXX-5G.arris tg3452

Now, you can use the below methods to login into your router. Follow this Arris TG3452 setup for complete guidance.

Using Most frequent Credentials 

  1. Launch any of your web browsers. It can be Chrome, Opera, firefox, edge, etc
  2. Now, enter the IP in the URL box of the browser. You must check the IPs one after another to get your exact IP. Try them one after another. ( 192.168.0.1192.168.100.1, 192.168.7.254, 192.168.1.254 )
    Sr. No.IP
    1192.168.0.1
    2192.168.100.1
    3192.168.1.254
    410.0.0.1
    5192.168.2.1
    6192.168.1.1
    7192.168.100.254
    8192.168.7.254
    9192.168.1.253
    10192.168.15.1
    11192.168.254.254
    12192.168.1.100
    1310.0.0.138
    14192.168.88.254
  3. If the above IPs don’t work, you can click here. The site will auto-detect your router’s IP.
  4. Enter the IP in the URL box and click go.search ip
  5. The browser will load the Arris router login page. And you will see two boxes asking for your Arris TG3452 default password. If the default credential is not in your knowledge, you can use any of them from the table below. arris login
Sr No.UsernamePassword
1Adminpassword
2blankPrinted on router label
3adminadmin
4cusadminpassword
5adminblank
6blankblank
7adminmotorola
8admin1234
9blankPrinted on router label
10arrisarris
11adminPrinted on router label
12blankblank
13blankpassword
14blankadmin
15blankPrinted on router label
16blankpassword

If you cannot log in by this method, you can try the second method below. 

Use the Username and Password printed on the router’s label.

Don’t worry if the above method doesn’t work for you. You can take the help of the login credential available on the arris router’s label. 

  1. Locate a label at the backside of your router. The label contains the login username and password that will be required.back label
  2. The manufacturer provides a default Username and Password for you to login into your router.arris tg3452 login
  3. Enter the credentials provided there on the router’s login page and click go. 

If this method also doesn’t work, go for the method discussed below. 

Resetting the Router 

If any of the above methods don’t work, you already have set up a credential for login, which you have forgotten. Now, the only solution that remains is resetting the arris router. 

  1. Look for a tiny hole at the backside of the router. That tiny hole has the reset button inside it.
  2. Now, you have to press that button. But that only be done by a thin needle-like object like a toothpick. reset hole
  3. Keep the button pressed with a sharp needle or toothpick for about 15 to 30 seconds. 
  4. Wait till the light flashes up. Now, your router has been restored to default.leds
  5. The router will lose connection to all connected devices after the factory reset
  6. Now, are you okay with going further? 
  7. Start again with the first method discussed above. This time surely, you will be able to login into your router.

Still, there can be some issues in the login process; then you follow some simple instructions not to let that happen. Let’s discuss those troubleshooting points in detail. 

Troubleshooting Errors during Arris TG3452 login

You can face problems like sudden disconnection from the network or the router’s acting differently. These problems could happen because of wrong passwords or using the wrong IP. You can solve those errors by following the points mentioned below.

  • There is a possibility that the router and your device are not connected for network sharing. And that’s why your login page is not loading. Ensure that there is a proper connection between your arris router and your device.device connection
  • Another reason the login page is not loading is that you are using a different IP other than your router. Please check the correct IP for your router from the above table. 
  • There can be some normal bug in your router that can be solved by powering off and switching it on again.router
  • You should ensure that your router’s data cables are not connected loosely. Some damage in your router wiring can also cause connection loss. 

So, you can just follow these steps and fix your problems regarding logging into your router. . Henceforth, you will not face any problems again.

See Also: 192.168.0.101 IP Login Guide, Username & Password

FAQs

How to log in into my Arris router?

For logging into your arris router you can use the default credentials available at the backside of your router. But before that for loading the login page you have to drop your router’s IP in the URL box of your browser.

What is the default username and password for Arris router?

The default logins for your arris router is ‘admin’ and ‘password’ respectively for your username and password.

What is the method to reset arris router?

You will see a reset button inside a tiny hole at the backside of your arris router. Use a sharp toothpick to press the reset button inside the hole for 15 to 30 seconds. Wait till the light flash up in your router. Now, your login credentials are reset to factory default.

What is an Arris TG3452?

It is a wifi router which supports 2x192 Mhz and 2x96 MHz OFDM in the downstream and upstream respectively. It consists of 2 FXS ports of carrier-grade VoIP. a 4-port gigabit router and double band 802.11nac wireless access point.

See Also: How To Perform Arris Router Login [Complete Guide]

Conclusion

Logging into the Arris router is quite straightforward. Using the above methods, you will surely be able to login into the router. You can take help from the table of the IPs and the Username and Password for your login purpose. Go through the troubleshooting points to encounter errors during the whole purpose. So, that’s it. Now, you will face no issue in handling Arris routers. Now, you won’t need any professional technician. Nor, you’ll have to ask a friend about it. You are hoping that this Arris TG3452 manual helped you; happy browsing. 

See Also: Arris TG1682G Default Router Login Guide

Leave a Reply