192.168.1.114- Admin Login, Username And Password

Knowing the device’s username and password is necessary to access the admin login for a device with the IP address 192.168.1.114. The post will lead you to how to access, modify and change this IP address.

Open a web browser on a computer that connects to the same network as the device, type its IP address (192.168.1.114) in the address bar, and then hit enter to access the admin login for that device. To access the admin login, go to the login page and type the device’s username and password. If you need the login information, check the device’s handbook or get help from the manufacturer.

In addition to answering some commonly asked questions and offering a conclusion, this article will walk readers through gaining access to the device’s admin login.

Table of Contents

Details Regarding 192.168.1.114.

Devices connected to a local network, including modems, routers, and other networking hardware, utilize the IP address 192.168.1.114. This IP address is a private IP address, which means that only computers on the local network can access it; it cannot be accessed from the internet.

You need to know the username and password of the device to access the admin login for a device with this IP address.

Steps To Access Router 192.168.1.114

Accessing the router’s admin page is always a good idea if you need to make a change, and doing so is easier than you may imagine. Here are the steps you must follow to do so:

Launch a web browser on a computer or device part of the same network as the device with the IP address 192.168.1.114.
Enter the device’s IP address (192.168.1.114) into the web browser’s address bar.

There should be a login page. The username and password for the device must be entered. If you need help remembering the username or password for the device, check the handbook or ask the manufacturer for help.

You should be able to access the device’s admin login after providing the proper username and password.

How To Set Up A Router Using 192.168.1.114?

Navigating the router admin page can be challenging because of all the numbers and technical terms. Changing the login, as mentioned above information is a fantastic place to start.

Setting up router 192.168.1.114 requires changing the settings on your computer or another network-connected device. You may set it up by following these instructions:

After logging in, you should be sent to the router’s setup page. Here, you may modify the router’s settings, including port forwarding, turning on or off wireless access, changing the network name and password, and activating or disabling wireless access.

Navigate to the wireless settings page and search for the network name (SSID) and password-changing options.
Navigate to the wireless settings page and search for options to activate or disable wireless access.
Find the choices to create new port forwarding rules on the port forwarding page to configure port forwarding.

Be careful to click the apply or save option after making the required adjustments before leaving the page. The choices’ positions and names may differ depending on the router’s brand and model.

It’s crucial to remember that altering the router’s settings may impact network access, so be prepared with a backup strategy just in case. In addition, be sure to save the login and password for the router in a secure location and never divulge them to anybody.

Keeping the router’s firmware up to date is also essential; you can do this by going to the router’s settings page or the manufacturer’s website. Click here, if you want to know What Is Wireless PAN DHCP Server.

How To Change Your Local IP Address 192.168.1.114?

You must modify the settings on your computer or another network-connected device to change your local IP address to 192.168.1.114. The following instructions show you how to change your local IP address to it:

Search for “Control Panel” in your computer’s Start menu. To open it, choose “Control Panel.”

Select “Network and Sharing Center” on the Control Panel’s menu.
The Network and Sharing Center’s left menu should be used to select “Change adapter settings.”
Find the network adapter you are now using to connect to the local network. Using the drop-down menu, right-click the adapter and choose “Properties.”

The Properties box should highlight Internet Protocol Version 4 (TCP/IPv4) before clicking the “Properties” button. From the list of options, choose “Use the following IP address from the list of options.”
The required IP address (192.168.1.114) should be entered in the IP address box, and “255.255.255.0” should be entered in the Subnet mask field.
Enter your router’s IP address in the Default gateway area (this is usually in the range of 192.168.1.1 – 192.168.1.254)

Enter “8.8.8.8” for the Alternate DNS server and “8.8.4.4” for the Preferred DNS server.
To save the modifications and dismiss all windows, click “OK.”

For the modifications to take effect, your computer needs to be rebooted.

Steps To Change Your Wi-Fi Password

You can experiment with more router settings, but you might also want to change the Wi-Fi network’s specifics. Its SSID or Service Set Identifier knows your Wi-Fi network. The steps are mentioned below to easily change your Wi-Fi password without any problems.

You may modify the Wi-Fi network password by going to the wireless settings page and searching for the “change wireless password or security key” option.

Remember to click the apply or save button after making the required adjustments.
Changing the Wi-Fi network’s name and password might impact linked devices, so update the new information on the network’s connected devices.
To prevent unwanted access to your network, be careful to use a strong, unique password.

Thus, now the password has been changed.

FAQS

The username and password for a device with the IP address 192.168.1.114 are predetermined. Describe them.

Depending on the manufacturer and model, a device's default username and password may be different.

What should I do if I forget the device's login credentials and password?

If you need assistance remembering your username and password, contact the manufacturer or consult the device's manual. Suppose you reset some devices using the reset button to their factory default settings. In that case, the current login and password will be erased.

Can I use the internet to access the administrative area of a device with the IP address 192.168.1.114?

No, since 192.168.1.114 is a private IP address, only devices plugged into the local network may access it.

Can I change the IP address of my device?

Yes, you may change the IP address of your device. You are attempting to offer a free IP address. If you are outside of your router's DHCP range, it won't be able to provide you with an IP address. If you have inquiries about the IP address range, get in touch with the network administrator.

Conclusion

For a device having an IP address of 192.168.1.114, the admin login can only be accessed with the device’s username and password. If you adhere to the instructions in this thread, you can access the device’s administrator login. You can find the username or password for the device in the manual.

Your information must be kept safe. Thus, you should never share your login credentials or password with anybody.

Dave F.

Married. Father of 2. Progressive Christian. Computer security professional. Published author. KC Royals fan. Ex-conservative, ex-evangelical.